Solar Boost 2000E Controller 12 Vdc

SB2000E Controller 12vdc

Item# 501SB200012V

Regular price: $279.00

Sale price: $217.90

Product Description

SOLAR BOOST™ 2000E
MAXIMUM POWER POINT TRACKING PHOTOVOLTAIC CHARGE CONTROLLER
SPECIFICATIONS	Solar Boost 2000E
Output Current Rating	25 Amp Maximum
Nominal System Voltage	12 VDC
PV Open Circuit Voltage	30 VDC Maximum
Standby Power Consumption	17mA Typical
Charge On Power Consumption	70mA Typical
Charge Algorithm	Fully automatic two stage charge, Bulk & Constant Voltage. A third manually actuated
	Equalize charge function is included to periodically condition lead-acid batteries.
Charge Voltage Setpoint Range	13-16VDC (14.0VDC initial factory setting)
Equalization Voltage	Charge voltage setting +1.2VDC
Temperature Compensation	Optional temperature sensor adjusts charge voltage setpoint based on measured battery
	temperature. Field selectable slope,  -5.0mV/ΊC/cell (lead-acid), or -2.0mV/ΊC/cell (NiCd)
Power Conversion Efficiency	95% @ 15 Amp Output
Panel Dimensions	4 5/8”H x 6 3/8”W x 1 7/8”D (11.75cm x 16.19cm x 4.76cm)
Construction	Open frame construction with conformal coated electronics visible from rear. Designed to
	mount into a rectangular surface cutout. Optional conduit ready surface mount box available.
Front Panel Displays	LCD digital display shows PV module input current, output charge current and battery
	voltage. Charge status LED shows present charge mode and battery state of charge.
Digital Display Range/Accuracy	Voltmeter,  19.99VDC / ±0.10% F.S.	Ammeter,  26.0A / ±0.75% F.S.
Specified Temperature Range	0 to +40ΊC  (Extended range -40 to +50ΊC, will operate but may not meet/spec.)
• Part Numbers & Shipping Weight
Solar Boost 2000E	SB2000E	2 lbs	0.91kg
SB2000E wall mount box	720-0011-01	2 lbs	0.91kg
Battery Temp. sensor, 20’ cable	930-0022-20	1 lbs	0.46kg
As a part of our continuous improvement process
specifications are subject to change without prior notice
• The Ultimate Photovoltaic Charge Controller Increases Charge Current Up To 30% Or More!		Get Improved Performance FromYour Solar Modules and Batteries
Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 2000E to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.		• Patented MPPT technology increases charge current up to 30% or more!
		• 12 Volt / 25 Amp rating supports wide range of applications
The Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.		• Multi-stage stage PWM charge control improves battery performance & life
		• Electronic current limit prevents overload or nuisance fuse blow
A built in LCD digital display monitors solar charge performance. The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.		• LCD digital display monitors PV charge performance
		• Durable powder coat finish & conformal coated electronics resist corrosion
A built in LCD digital display monitors solar charge performance. The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.		• Available temperature compensation further improves battery performance & life
		• Fully protected against excess current, temperature, transient voltage & polarity
		• Full 36 month limited warranty, optional extended coverage available
How Do Solar Boost™ Controllers Increase Charge Current?
Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power!