OutBack MPPT FM60-150 Charge Controller.

Nominal Battery Voltages
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)

Maximum Output Current
60 amps @ 104° F (40°C) with adjustable current limit

Maximum Solar Array STC Nameplate
12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts

NEC Recommended Solar Array STC Nameplate
12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts

PV Open Circuit Voltage (VOC)
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum

Power Conversion Efficiency
98.1% @ 60 Amps in at 48 VDC System voltage - Typical

Charging Regulation
Five Stages: Bulk, Absorption, Float, Silent and Equalization

Voltage Regulation Set points
10 to 60 VDC user adjustable with password protection

Equalization Charging
Programmable Voltage Setpoint and Duration - Automatic Termination when completed

Battery Temperature Compensation
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell

Voltage Step-Down Capability
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input

Programmable Auxiliary Control Output
12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)

Operating Temperature Range
Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)

Warranty
Standard 5 year / Available 10 Year

Weight
11.65 lbs (5.3 kg)

Dimensions
13.5 x 5.75 x 4" (40 x 14 x 10 cm)