Phone: 479-488-6048

Save 30%
Conext XW4548 Inverter/Charger (120 / 240 V / 60 Hz)

Conext XW4548 Inverter/Charger (120 / 240 V / 60 Hz)


List price: $3,520.00  

$2,460.69

You save: $1,059.31 (30%)
311-0015
+

Schneider Electric Conext XW4548 Inverter / Charger (120 / 240 V / 60 Hz)

Conext XW is an adaptable pure sine wave, single-phase, split-phase or three-phase inverter/charger system with global grid-tie functionality and dual AC power inputs. From single Conext XW unit to multiple clusters of units, up to 36 kW each, the Conext XW is a scalable system that allows for the integration of solar capacity as required.

Product applications

  • Residential, backup power and grid-tie
  • Off-grid solar
  • Community electrification
  • Small commercial, backup power and grid-tie

XW Series Inverter / Charger Features:

  • True sine wave output
  • 120/240 volt AC spilt-phase operation
  • Dual AC inputs
  • Integrated design to minimize external balance-of-system components
  • XanBus™-enabled network communication
  • Certified to UL1741 and CSA for utility-interactive applications
  • Unprecedented surge capacity
  • Efficient, power factor corrected, high-current, multistage battery charging
Device short name XW4548 120 240 60
Electrical specifications
Output power (continuous) at 40°C 4.5 kVA
Output power (surge) at 40°C 9.0 kVA (15 sec)
Peak output current (rms) L-N: 75 A (20 sec), L-L: 40 A (20 sec)
Input current at rated power 96 A
Type of signal True sine wave
Automatic transfer relay 60 A
Typical transfer time 8 ms
DC input voltage (nominal) 50.4 V
Input voltage limits 40 to 64 V
Charging current 85 A
Power factor corrected charging 0.98
Auxiliary relay output 0 to 12 V, maximum 250 mA DC
Idle consumption (search mode) < 8 W
AC input voltage (nominal) 120 / 240 V split-phase
AC output voltage L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
Input voltage limits (bypass/charge mode) L-N: 78 to 140 V (120 V nominal); L-L: 160 to 270 V (240 V nominal)
AC1 voltage range (sell mode) L-N: 106 to 132 +/- 1.5 V; L-L: 214 to 260 +/- 3.0 V (automatically adjusts when entering sell mode)
Frequency 60 +/-0.1 Hz
AC input frequency range (bypass/charge mode) 55 to 65 Hz (default); 44 - 70 Hz (allowable)
AC1 frequency range (sell mode) 59.4 to 60.4 +/- 0.05 Hz (automatically adjusts when entering sell mode)
Total harmonic distortion (THD) at rated power < 5%
AC connections AC1 (Grid), AC2 (Generator)
AC input breaker 60 A two-pole
Utility interactive Yes
CEC power rating 4.5 kW
Efficiency
Peak 95.6%
CEC weighted 93.0%
General specifications
NEMA degree of protection NEMA1R (indoor rating) (sensitive electronic components sealed inside enclosure)
Product weight 53.5 kg (118.0 lb)
Shipping weight 75.0 kg (165.0 lb)
Product dimensions (H x W x D) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in)
Shipping dimensions (H x W x D) 71.1 x 56.5 x 26.7 cm (28.0 x 22.3 x 10.5 in)
Ambient air temperature for operation -25 to 70°C (-13 to 158°F) (power derated above 45°C (113°F)
System network and remote monitoring Available
Warranty (Depending on the country of installation) 2 or 5 years
Part number 865-1005
Features and options
Display type Status LEDs indicate AC In status, faults/warnings, equalize mode, battery level. Three-character display indicates output power or charge current, fault/warning codes. On/off and equalize buttons
Supported battery types Flooded (default), Gel, AGM, custom
Battery bank size 100 to 2000 Ah (scaled to PV array size)
Battery temperature sensor Included
Multiple-unit configurations Split-phase: up to four parallel units in 120/240 V. Three-phase: up to two units per phase (six units total)
Regulatory approvals
Safety UL1741, CSA 107.1
EMC FCC and Industry Canada Class B
Interconnect IEEE 1547 and CSA 107.1

Specifications are subject to change without notice.

240 Volts
4500 Watts
Battery
Inverter - Charger
Hybrid
Pure Sine
48 Volts
None

No posts found