| • Combine Multiple Strings from a
Single Array |
• Outdoor Rain-Resistant Aluminum Enclosure |
| • Outdoor Rain-Resistant Aluminum Enclosure |
• Optimized Wire Routing For Easy
Installation |
| • Accommodates dual 2/0 AWG output wiring |
• Generous Wiring Conduit
Knockouts |
| • Accommodates 150VDC DC Breakers or 600 VDC Fuses |
• Wall, Roof or Pole Mountable |
|
|
| The OutBack Power Systems FLEXware PV Series Combiner
Box sets the new standard for PV balance-of-system |
| hardware. Ideal for both small or large systems,
the FLEXware PV8 and FLEXware PV12
accommodates the |
| overcurrent protection requirements of your
application. From 150VDC breakers for low voltage PV systems, to |
| 600VDC fuse holders for high voltage PV systems, the
FLEXware PV Combiner series handles it all. |
| Designed to survive in outdoor environments, the
rainproof, UL type 3R powder coated aluminum chassis |
| can be mounted on a wall, sloped roof or pole. The
unique angled negative terminal bus bar design makes wiring fast |
| and easy without the common problem of larger output
conductors blocking access to the smaller input terminals. |
| Dual output lug terminals are included for up to 2/0
AWG conductors. The tinted
flame-retardant polycarbonate |
| deadfront panel creates a clean appearance while
preventing accidental contact with the live terminals and is easily |
| removable during installation. The FLEXware PV Series
Combiner Box makes it easy to take your installation to the next level. |
|
|
| FLEXware™ PV Specifications |
FLEXware PV 8 |
| Enclosure Material |
Powder coated aluminum |
| |
with stainless steel hardware |
| Mounting Options |
Vertical
wall mount, pole mount or |
|
sloped roof mount to 14
degrees |
| |
incline (3 in 12 roof pitch) |
| Enclosure Rating |
Outdoor
Rainproof, UL Type 3R |
| Enclosure Security |
Padlock
hole in chassis |
| |
and cover for up to 3/8 inch
pad lock |
| Output Terminals |
#14 -
2/0 AWG (2.08 - 67.43 mm2) |
| |
Two box lug terminals
included |
| Number of separate circuits |
One
Circuit |
| Number of 150VDC breakers |
up to
8 |
| Number of
600VDC fuse holders |
up to
6 |
| Input Terminal |
150VDC
Breakers / #14 - 6 AWG (2.08 - 13.3 mm2) |
| |
600VDC Fuse / #14 - 10 AWG
(2.08 - 5.26 mm2) |
| Dimensions Unit (H x W x D) |
15.2
x 9.2 x 3.9” (38.7 x 23.3 x 9.9 cm) |
| Shipping (H x W x L) |
4.3 x
9.5 x 19” (10.9 x 24.1 x 48.3 cm) |
| Weight Unit |
4.4
lbs (2.0 kg) |
| Shipping |
5.5
lbs (2.5 kg) |
| Certifications |
ETL
Listed to UL1741, UL67, CSA22.2 #29 |
| *Specifications subject to change without notice |
|
|
|
